Low rate IBC production cell for small-Medium sized markets
Pachmas, who for many years imported IBC from Europe, start at the end of 2007 to produce IBC's locally replacing the import of the volumetric item. That enables faster service and flexibility to regional customers while providing them the option between buying the whole product or just the inner bottle for "Do-It-Yourself" non UN reconditioning (if the metal cage is still functioning well).
Locally produced IBC's carry Fustiplast brand and comply with the BAM regulation. Our IBC line product portfolio and specification can be seen in the product folder
. Our IBCs are suitable for the transportation and storage of liquid products of many types, including dangerous chemicals, food, cleaning materials, adhesives and glues, water based paints, oil and many other substances.
Pachmas IBC production line is based on two main cells:
1. Pachmas' designed Galvanized metal cage production cell
2. A Mauser's machinery blow molded bottling tool.
The Galvanized metal cage production cell is a special developed "low rate production cell" aimed for small and medium sized markets were an expensive full automatic line is not economic to install. That line was developed by Pachmas engineering department and is offered to new IBC potential producers as either a know-how licensee based transfer or a turn-key machinery project. The Galvanized metal cage production cell is aimed for <70K IBC per year while a full automatic line is aimed for above 140K IBC's per year.
For further details about Pachmas designed Galvanized metal cage production cell, kindly contact
Pachmas VP commerce.